close cell heat insulation K2 rubber foam pipe for air conditioner

Kingflex rubber foam K2 pipe BS476 ,UL94,ASTM E84 certificated low thermal conductivity smoke density meet ZA3

Kingflex Aircon outperforms in fire resistance, water vapor permeability and thermal conductivity features. 

PRODUCT OVERVIEW

All Kingflex elastomeric insulations are engineered and manufactured for HVAC and other industrial applications. With closed cell structure Kingflex insulations effectively retard heat flow and prevent condensation when properly installed. The environmental friendly materials are manufactured without the use of CFCs, HFCs or HCFCs. They are also formaldehyde free, low VOCs, fiber free, dust free and resistant to mold and mildew.

Kingflex Aircon outperforms in fire resistance, water vapor permeability and thermal conductivity features. Its unique formulation makes it an ideal choice for extreme design conditions such as high humidity and low line temperature.

KEY PERFORMANCE MEASURES

_297°F to+ 220°F (-183°C to .105°C) temperature range

0.08 perm-inch(1 .16x10-13 Kg/m*s"Pa)water vapor transmission

0.27 Btu-in.Jh*f ft2·°F:(0 .0 3 9W/m *K)thermal conductivity values

APPLICATIONS

Kingflex Aircon insulation is used to retard heat transmission and control condensation from chilled-water and refrigeration systems. It also efficiently reduces heat transfer for hot-water plumbing and liquid-heating and dual-temperature piping. Kingflex Aircon is ideal for applications in:

Air-conditioner, including hot gas piping

Icebox

Solar collectors

Automotive and diesel under hood, including air conditioning, heating

Slip the tubular Kingflex Aircon onto unconnected piping or, for connected piping, slit the insulation lengthwise and snap it over. Seal the joints and seams with KingGlue 520 adhesive. When installed outdoors, KingPaint, a weather-resistant protective finish, is recommended to be applied over the surface to achieve maximum UV protection.

All Kingflex insulation must be properly installed to ensure maximum efficiency and long lasting performance. Refer to the Kingflex Insulation Installation Manual for detailed instructions.

THE SIZE WE CAN SUPPLY :

THICKNESS	SPECIFICATION
	SMALLEST			LARGEST
(mm)	ID(mm)	×	THK(mm)	ID(mm)	×	THK(mm)
6 mm	6 mm	×	6 mm	28 mm	×	6 mm
6 mm	6 mm	×	9 mm	54 mm	×	9 mm
6 mm	6 mm	×	13 mm	89 mm	×	13 mm
6 mm	6 mm	×	19 mm	115 mm	×	19 mm
6 mm	6 mm	×	25 mm	108 mm	×	25 mm
13 mm	13 mm	×	32 mm	89 mm	×	32 mm
16 mm	16 mm	×	35 mm	76 mm	×	35 mm
19 mm	19 mm	×	38 mm	60 mm	×	38 mm

THE RUBBER FOAM DATA

Property	Unit	Value	Test Method
Temperature range	°F (°C)	-183-105°C	GB/T 17794
Density range	Ibs./ft3(kg/m3)	48-96	GB/T 6343
Thermal conductivity	W/m*k	0°C , 0.040	GB/T     GB/T 10294
Water vapor permeability	_____	>=5500	GB/T 17794
Flame spread and smoke developed index		Class 1 & Class 0	BS476 part 7 & part 6
		V0	UL94
Water absorption, by volume	%	0.2	ASTM C209
Mold growth	-	Meet requirement	UL181
Bacterial resistance		Meet requirement	ASTM G22
Fungi resistance		Meet requirement	ASTM G21/C1338
Resistance to agent chemical	-	Stable performance to agent chemical	-
Ozone resistance	-	good	ASTM D1149
Aging resistance	-	150 hours, slight wrinkles, no cracks, holes or distortion	-
Wall thickness (normal) sheet	In(mm)	1/8”, 11/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2” (3,6, 9, 13, 16, 19, 25, 32, 40, 50)	-
Width, sheet	In(m)	40”, 48”(1, 1.22)	-
Length, sheet	Ft(m)	36” (0.915)	-
Wall thickness (normal) roll	In(mm)	1/8”, 11/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2” (3,6, 9, 13, 16, 19, 25, 32, 40, 50)	-
Width, roll	In(m)	40”, 48”(1, 1.22)	-
Length, roll	Ft (m)	98, 49, 33, 26, 23, 20, 13, 10, 10, 8 (30, 15, 10, 8, 7, 6, 4, 3, 2.5)	-

close cell heat insulation K2 rubber foam pipe for air conditioner